Cut the sealing membrane according to the size of the floor to be covered.
Prepare the floor with a suitable primer before applying the tile adhesive with a notched trowel (4 mm x 4 mm).
Apply the sealing membrane to the floor precisely and from edge to edge and smooth it towards the edges.
Avoid air inclusions and glue residues!
After installing the sealing membrane, apply the sealing tapes and corners and continue according to the installation instructions of the sealing products.
The sealing membrane can be overlapped by 5cm using sealing adhesive in the overlap area.
If not, the joints can be covered with sealing tape and sealing material.
Mix the sealing adhesive and apply it to the waterproofing membrane with a suitable notched trowel.
Now you can start tiling without further waiting.